自定内容
Canon MG4120 MG4220 MG5220 Waste Ink Counters Reset
作者:管理员    发布于:2019-01-17 10:28:33    文字:【】【】【

First, what conditions does the printer need to be cleared?
       Printer driver error support code: 5B00 5B02 5B04 5B14 1701 1702 1700 The ink collector is full, the printer has an error, please refer to the manual and contact the service center to indicate that the printer needs to be cleared.
Second, how to ensure that the printer is cleared successfully without locking the motherboard?
       This shop uses the latest original maintenance program (ST V4720) of the service station to clear it online. It has successfully cleared hundreds of the latest printers, and can enter the maintenance mode to ensure 100% clear success! The technology is mature, safe and efficient, and will never lock the motherboard.
Third, Canon printers need to enter the maintenance mode steps as follows:
      The printer enters the maintenance mode: the printer must be connected to the computer with a USB cable and ensure that the printer recognizes the ink cartridges.
     1. Turn off the printer, first press the [Stop] key, then press the [Power] key. (Do not release both buttons.)
      2. When the power light is on, do not release the [Power] key, release the [Stop] button, then press the [Stop] key to release it 5 times, then release the [Power] key.
3. When the power indicator light is on, the maintenance mode is successful. Clear Software (STV5302) identifies the printer model to determine the model online sharer clear tutorial

Features of the program:
Interface Language: English
Compatibility with OS: Only Windows, with Mac OS is not compatible
The program works after activation only on the PC where it was activated.
If the service mode is not working on the printer, then this program will NOT be able to work with the printer and only the replacement firmware of the memory chips will be able to solve the problem. For many models, you can order the already flashed chips on our website .

The program resets the absorber counter (diaper test) for the following printer models, provided that the printer has a service mode that is normal :

EXAMPLE - PROCEDURE FOR RESET (SEE VIDEO BELOW ALSO):

License ID> Open the software and a code will appear, copy it and pass to opening a Support Ticket, we will respond with the Activation Code so you can open the reset software. 
After that, put the printer into maintenance mode and reset it: 
1. Turn off the printer, connect the printer via the USB cable to the computer.

2. Press and hold the Cancel button (Red).

3. Press and hold the Power button.

4. Release the Cancel button and press 5X (five times), and press and hold the Power button. 
5. Now release the Power button. 
6. The green light should be on confirming the mode of service. 
7. Open Software Reset, in the first screen locate the option "Ink Absorber Counter", select "Main" and press "Set". (some models are another option, such as "Main_Black" and / or "Main_Color") 
8. The message "Finished" should appear 
9. Turn the printer off and on. Ready!
 

ATENTION: If you do the procedures to enter service mode and it is left with the orange LED lit then the firmware is corrupted.

MODELS COMPATIBLE WITH THE SOFTWARE: (If your model is not listed below, then it probably will not work on your model, please contact us for more information.)

E-series: E200, E300, E3100, E460, E461, E464, E468, E480, E481, E484, E488 and E489.

G-Series: G1101, G1101, G1101, G1101, G1101, G1101, G1101, G1101, G1101, G1101, G1101, G210, G1210, G1210, G1400, G1510, G1510, G1800, G4100, G3600, G3600, G3800, G3810, G3900, G3910, G3900, G3910, G4000, G4010, G4100, G4110, G400, G4210, G4400, G4410, G4500, G4510, G4600, G4610, G4800, G4810, G4900, G4910, G4902 and G4912. (It is not MG, only G).

IB-series: IB4010, IB4020, IB4040, IB4050, IB4060, IB4070, IB4080, IB4090, IB4100, IB4110, IB4120, IB4140, IB4150, IB4160, IB4170, IB4180 and IB4190.

IP-series: IP7240, IP110, IP8740, IP2870S and IP2880S.

IX-series: IX6810 and IX6840.

MB-series: MB2010, MB2020, MB2040, MB2050, MB2160, MB2110, MB2120, MB2140, MB2150, MB2150, MB2160, MB2300, MB2320, MB2350, MB2360, MB2390, MB2700, MB2710, MB2720, MB2740, MB2750, MB5460, MB5450, MB5150, MB5150, MB5160, MB5170, MB5180, MB5190, MB5400, MB5410, MB5420, MB5440, MB5450, MB5450, MB550, MB5460, MB5470, MB5480 and MB5490.

MG-series: MG2570S, MG2580S, MG3600, MG3620, MG3620, MG3650, MG3660, MG3670, MG3680, MG5500, MG5510, MG5520, MG5520, MG5550, MG5550, MG5560, MG5580, MG5580, MG5600, MG5610, MG5620, MG5640, MG5650, MG5660, MG5670, MG5680, MG5780, MG5700, MG5720, MG5721, MG5722, MG5740, MG5750, MG5751, MG5752, MG5753, MG5760, MG5765, MG5765, MG5766, MG5770, MG5780, MG5790, MG5795, MG6700, MG6800, MG6800, MG6820, MG6821, MG6822, MG6840, MG6850, MG6850, MG6851, MG7685, MG6860, MG6865, MG6866, MG6870, MG6880, MG6890, MG6930, MG7700, MG7710, MG7720, MG7720, MG7740, MG7750, MG7751, MG7752, MG7753, MG7760, MG7765, MG7765, MG7766, MG7770, MG7780 and MG7790.

MX-series: MX320, MX328, MX330, MX338, MX340, MX347, MX348, MX350, MX357, MX358, MX360, MX370, MX390, MX450, MX471, MX472, MX474, MX475, MX476, MX477, MX478, MX490, MX420, MX420, MX920, MX920, MX520, MX520, MX520, MX536, MX536, MX520, MX720, MX720, MX820, MX920 and MX924.

TR-series:

TS-501, TS-200, TS-200, TS-200, TS-200, TS-200, TS3120, TS3170, TS3120, TS3120, TS3120, TS3120, TS3120, TS3120, TS5050, TS5050, TS5051, TS5060, TS5060, TS5060, TS5070, TS5090, TS5100, TS5110, TS5120, TS5140, TS5150, TS5151, TS5160, TS5170, TS5180, TS8060, TS8050, TS8050, TS8050, TS8050, TS8052, TS8060, TS8070, TS8070, TS8080, TS8090, TS8100, TS8120, TS8120, TS8140, TS8150, TS8150, TS8151, TS8152, TS8602, TS8602, TS8802, TS8805, TS8205, TS9105, TS9105, TS9105, TS9105, TS9105, TS9105, TS9105, TS9105,

XK-series: XK50 and XK70.
 

ATTENTION: Models E400, E407, E408, E410, E417, E418, E470, E471, E477, E478, MG2410, MG2510, MG2910, MG3010, MG3020, MG3022, MG3040, MG3050, MG3051, MG3052, MG3053, MG3060, MG3070, MG3077, MG3070S, MG3077S, MG3080 and MG3090 are not compatible with this software reset, as they are "disposable" models, according to the manufacturer, in this case you can try the rewrite of Eprom, that is, software does not work on these models.

With QQ chat and communication, I instruct you to remotely operate the reset printer

【QQ chat tool 】 TeamViewer 13 remote tool ID password sent to me

Technology QQ: 474237340 :474237340@qq.com

 

The website is updated slowly. If there is any missing email, thank you.

 

474237340@qq.com

 

This website www.duanshao.top

Website update is slow, if there are missing models, send email inform, thank you!!
Contact us at Mail: 474237340@qq.com
浏览 (484) | 评论 (0) | 评分(0) | 支持(0) | 反对(0) | 发布人:管理员
将本文加入收藏夹
脚注信息
Copyright (C) 2018-2022 All Rights Reserved. 凡诚网 版权所有  备案号:鄂ICP备18028934号-2

服务时间:周一至周日 08:30 — 22:30  
       
  段工技术QQ; 474237340 邮箱474237340@qq.com
 
打印机清零软件下载、EPSON 固件刷机 EPSON打印机清零软件、CANON清零软件、三星刷机清零、佳能5B00 5B02 1702代码、打印机清零软件、打印机错误代码5B00 5B02、打印机灯闪7下错误5B02、1702废墨水收集器满、废墨收集垫到寿命、佳能维修模式方法 G1800 G2800 G3800 G4800 MG3580 MG3680 G1810 G2810 G3810 G4810 打印机维修打印机堵头软件清洗方法 打印机技术的研究,打印机维修方面的新的分享
߿ͷϵͳ